女生自慰网站,91乱伦中文字幕乱伦,亚洲五月婷婷,午夜爱爱爱爱

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

stroke adjustable cylinder Sold to Sweden

Release time:2023-11-12 15:26:02 Hits: Current position: Home > News

This article mainly introduces:

Sweden hydraulic cylinder,stroke adjustable cylinder manufacturer,stroke adjustable cylinder

Sweden stroke adjustable cylinder

(Sweden stroke adjustable cylinder,produced by Hengyu Group)

stroke adjustable cylinder are widely used in Sweden,because of powerful torque,clever hydraulic energy conversion,simple structure and reliable operation.So our company has designed stroke adjustable cylinder for customers from Sweden.

Introduction to stroke adjustable cylinder:

The body of the stroke adjustable cylinder on the processing process requirements: the body of the stroke adjustable cylinder is an important and essential part of the stroke adjustable cylinder, because it has an irreplaceable role. The processing requirements for this part are very high, requiring that the surface roughness of the stroke adjustable cylinder after processing should reach 0.4-0.8um, and the coaxiality and wear resistance requirements are also very high.

When the stroke adjustable cylinder is in use, ensure that the stroke adjustable cylinder and the surrounding environment should be clean. The tank should be sealed to prevent contamination. Pipelines and fuel tanks should be cleaned to prevent falling off the oxide sheet and other debris. Clean with lint-free cloth or special paper. Twine and binder should not be used as sealing materials. Hydraulic oil according to the design requirements, pay attention to the change of oil temperature and oil pressure. When there is no load, unscrew the exhaust bolt for exhaust.

In order to ensure the service life of the stroke adjustable cylinder, the medium used must not be mixed with impurities and stolen goods, so as to avoid scratching the inner arm of the stroke adjustable cylinder, causing damage to the seal and causing leakage in the stroke adjustable cylinder. It is required that the filtration accuracy of the system is not less than 80μm, the oil pollution is strictly controlled, the hydraulic oil is kept clean, the performance of the hydraulic oil is regularly checked, and the necessary fine filtration or replacement of the new working hydraulic oil is carried out.

The cavitation of the stroke adjustable cylinder has a great influence, and to avoid it, it is necessary to use the hydraulic oil reasonably and ensure the quality of the hydraulic oil. If the anti-foam property of the oil is poor, it is easy to produce foam, resulting in cavitation. Secondly, the change frequency of oil pressure is too fast and too high, which will also directly cause the formation of bubbles and accelerate the rupture rate of bubbles. The test shows that the speed of cavitation will be accelerated in the part with high frequency of pressure change. For example, at the inlet and outlet of the stroke adjustable cylinder, due to the relatively high frequency of pressure changes, the degree of cavitation is also relatively higher than that of other parts. In addition, overheating of the oil will also increase the probability of cavitation.

Answers to some questions about stroke adjustable cylinder:

How is the cylinder of hydraulic cylinder processed?
As the main parts of hydraulic cylinder, mining single pillar, hydraulic support, gun barrel and other products, its processing quality directly affects the life and reliability of the whole product. Cylinder processing requirements are high, the internal surface roughness requirements are Ra0.4 ~ 0.8&um, the coaxiality, wear resistance requirements are strict. The basic feature of cylinder is deep hole processing, which has always troubled the processing personnel. Due to the residual compressive stress on the surface of the surface layer, the rolling machining is helpful to seal the small cracks on the surface and prevent the expansion of erosion. Thus, the corrosion resistance of the surface can be improved, and the fatigue crack can be delayed or expanded, and the fatigue strength of the cylinder can be improved.

What is a hydraulic cylinder assembly?
Assembly, which means aggregate. A series of parts or products, formed to achieve a specific function of the whole, the general term for this system is assembly. The hydraulic cylinder assembly is not a single hydraulic cylinder part, which can be used by connecting the hydraulic hose.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
日韩人妻电影在线| 成在线人视频免费视频| 日本免费观看一区久久久| 国产精品无码亚洲字幕资源| 韫色过浓小说| 人妻人人| 久久久精品人妻| 日本福利一区二区| 日韩人伦一区二区| 熟女| 无码精品国产一区二区免费| 亚州色图第一页| 超碰久热| 精品国产一区二区三区无码| 九色人妻97| 狠狠AV无码精品一区二区三区| 骚妇入射内射在线观看| 日韩首页| 国内精品久久人妻无码网站 | 性日本| 99er热精品视频| 色欲精品国产亚洲AV动态图| 高清无码 在线视频| 要久久爱免费观看| 欧美日韩成人| 人妻精品一区| 沁源县| h网站在线| 亚洲欧美综合国产精品一区| 国产精品成人精品久久久| 久久久99精品免费观看| 中文字幕AVDVD线观看| 免费白浆大片| 亚洲日韩欧美一区二区三区| 国产多p混交群体交乱| 印度黄色片| 天一影院| 精品熟妇| 婷婷,人人操| 91娇妻素人| 熟女少妇av|